HAL LED Hipot and Lighting Tester
477A921

HAL LED

LED And Lighting Testers

The HAL LED has been designed with a reduced power measurement range with greater resolution than the HAL 104, making it ideal for the testing of low power electronics such as LED lighting.


Compare the HAL Series

Features 101 103 104 LED
Earth/Ground Bond  
AC Flash/Hipot
DC Flash/Hipot
DC Insulation Resistance
ARC Detection
Leakage    
Load Power      
Load Power (200mVA resolution)      
Power Factor    
Results Memory
Automation Option
Barcode scanner/printer Option
  View tester View tester View tester View tester

 

HAL LED

The HAL LED is designed to ensure maximum productivity and efficiency when safety testing on LED and other luminaire production lines; while the high resolution power measurement allows for greater quality control measures to be implemented. The HAL LED tests in accordance with UL 1598, UL 8750.

200mVA Resolution Power Measurement
LED lighting is fast becoming the choice for ‘green’ conscious consumers; manufacturers are striving to produce more efficient lighting solutions for a competitive market.
With 200mVA resolution, the HAL LED is designed so that manufacturers can measure the output of every product manufactured to ensure it falls within acceptable power limits. 

This gives the manufacturer peace of mind that correct components, such as LED drivers, were fitted at time of manufacture.
The HAL LED is appropriate for medium-large scale electrical manufacturers: LED lighting manufacturers, LED lighting importers, QA and product auditing departments and manufacturers of low powered equipment

Traceable Results
With quality systems placing more pressure on manufacturers to provide traceable, accurate results the HAL LED eliminates the pressure of manually logging test results.
Date and Time stamps are applied to each product tested along with an optional field a product identifier such as a serial or batch number. A large memory capable of storing 6000 tested products will capture the daily results of even the busiest production line.


Flexible User Configurable Test Sequences
The HAL LED can store up to 50 test sequences in its automatic mode configuration. Each test sequence can comprise of up to 5 individual test (not including repeats).
Once configured, automatic mode provides a structured and repeatable method of testing, ensuring that the required test parameters and timings are adhered to during end-of-productionline test requirements.


Designed with Safe Testing Practices in Mind
In order to aid compliance with safe test area requirements (EN 50191) the HAL LED utilises a number of safety features.
Isolated test outputs when performing Flash (HiPot) and Insulation resistance tests reduce the potential for shock.
The built-in guard switch enables automatic disconnection of test voltages if opened, ideal for ensuring safety if a person accidentally enters the test area during a potentially hazardous test. That coupled with a ‘plug and play’ style beacon port enables clear identification when high voltage testing is being performed.

Case Studies

Specialist Compliance Tester Improves Productivity at Hadar Lighting Specialist Compliance Tester Improves Productivity at Hadar Lighting
Specialist Compliance Tester Improves Productivity at Hadar Lighting

Investment in new test technology has enabled a leading manufacturer of industrial and commercial lighting products to significantly reduce production line test times, increasing ...

Seaward Tester Meets Safety and Compliance Standards at Pressure Washer Equipment Specialist Seaward Tester Meets Safety and Compliance Standards at Pressure Washer Equipment Specialist
Seaward Tester Meets Safety and Compliance Standards at Pressure Washer Equipment Specialist

JMS Janitorial Supplies, who undertakes the refurbishment of thousands of Karcher electric pressure washers sent to its site in Surrey by retailers from across the UK, uses 6 HAL ...

Seaward HAL104 shines in testing at lighting specialists Seaward HAL104 shines in testing at lighting specialists
Seaward HAL104 shines in testing at lighting specialists

Martech UK Ltd, which designs and manufactures a wide range of energy efficient light fittings, has improved its electrical safety testing procedure by installing an automatic sys...


Request a Quote


Optional Accessories

Technical Specifications

AC Flash / HiPot Test
Programmable Voltage Range0.10 kV-5.00 kV (10V/Step Resolution)
Frequency Independent of Supply50 or 60 Hz
Voltage Display Range and Accuracy0.10 kV - 5.00 kV ± 1% ± 5 Counts
Voltage Display Resolution0.01 kV
Current Display Range and Accuracy0.01mA-20.00mA ± 1% ± 5 Counts
Current Display Resolution0.01mA
Selectable Range of Pass/Fail Levels0.01mA-20.00mA
Maximum Current Output20.00mA @5kV
Optional Arc Detection9 Levels
Insulation Resistance Test
DC Output VoltageDefault Spec Value250V, 500, or 1000V Selectable
Display Range0.01MΩ-500MΩ
Display Range/Accuracy0.03MΩ - 350MΩ ± 5% ± 5 Counts
350MΩ-500MΩ
Indication Only
Display Resolution0.01MΩ
Pass/Fail Level0.00MΩ-500MΩ
Compliance Test Ranges
Current/Load Resistance/Time5A - 1000mΩ - Continuous
10A - 500mΩ - Continuous
25A - 200mΩ - Continuous
30A - 150mΩ - 60 Secs
40A - 100mΩ - 30 Secs
Settable Output Current Range0.1A - 40.0A
Selectable Range of Pass/Fail Levels0-1500 mΩ
Output Power Measurement
Display Range and Accuracy000.0VA to 99.9VA ± 5% ±5 digits
100.0VA - 999.9VA ± 5% ± 2 digits
Selectable Range of Pass/Fail Levels Measurement Circuit Characteristics Crest Factor:000.2 - 1000 VA
Crest Factor:
Maximum Crest Factor = 2 Harmonic Content: Accuracy degradation is directly proportional to % harmonic content.
Leakage Current Measurement
Display Range and Accuracy0.10mA-20.00mA ± 1% ± 5 Counts
Display Resolution0.01mA
Selectable Range of Pass/Fail Levels0.01mA-20mA
DC Flash / HiPot Test
Programmable Voltage Range0.10 kV-6.00kV (10V/Step resolution)
Voltage Display Range and Accuracy0.10kV-6.00kV ± 1% ± 5 Counts
Voltage Display Resolution0.01 kV
Current Display Range and Accuracy0.01mA-10.00mA ± 1% ±5 Counts
Current Display Resolution0.01mA
Selectable Range of Pass/Fail Levels0.01mA-10.00mA
Maximum Current Output10.00mA
Optional Arc Detection9 Levels
Earth / Ground Bond Test
Test VoltageNominal 6V AC
Frequency50 or 60Hz (Independent of supply)
Display Range and Accuracy0-1500mΩ ±2% ±5 Counts
Display Resolution1mΩ
Power and Leakage Test
Power Output Rating Test Voltage80V - 300V AC 20A nominal (VinVout)
Maximum Power Output999.9VA
Single Phase Power Factor Measurement
Display Range and Accuracy Ratio0.000-1.000*
*Displayed value for indication only
Selectable Range of Pass/Fail Levels0.000-1.000
Touch Current Measurement
Display Range and Accuracy0.02mA-5.00mA ± 1% ± 5 Counts
Display Resolution0.01
Selectable Range of Pass/Fail Levels0.02mA-5.00mA
Measuring DeviceIEC/EN 60990 Fig 4

Downloads

Do you own this product?

Register your HAL LED today to activate your warranty and to stay up to date with the latest product updates, news and support information.


Similar Products

Need Help?

Explore our support knowledge base

Stay in the know
Sign up to our mailing list today to stay up to date with the latest industry news and information from Seaward.

I'd like to talk to a sales advisor

Our team of sales advisors are on hand to help you with any queries you have about our products.
;