Product
Overview Specifications
& Manuals Register
Your Product Service, Repair
and Calibration

Cropico DO6

SPECIFICATIONS & MANUALS

If you're looking for the Cropico DO6 datasheet featuring full technical specifications or the instruction manual, you can find them here.

Manuals

Datasheets

Specifications

Technical specification
Measurement	4 Terminal Kelvin/Thomson, eliminating lead resistance errors
Display	4.5 digit 15mm 7 segment LED with polarity and overload indication. 2 digit 16 segment LED for unit display
Ranges	9 ranges manual selection with up/down keys, automatic selection with autorange function
Auto Zero	Permits the automatic zero of amplifiers and external circuits
Temperature Compensation	Measurement compensated for the following referenced to 20°C:Copper Cu = 3.93%/KBrass Ms63 = 1.50%/KBrass Ms80 = 1.60%/KAmbient sensed with Pt 100 sensor
Relay Output	For the pre-selected upper and lower limit values “Too small”,“Correct”, “Too large” Contact load = 30W max 48V 1 Amp
Dry Circuit Measurement	In accordance with DIN 41640 part 4 and IEC – 132-1 Open circuit voltage limited to 18mV
Interface	RS232 25 pin D-Bush talk listen function
Terminals	4mm safety sockets
Working Temperature	0°C to 50°C rel. humidity 90% max. non-condensing
Storage Temperature	-20°C to +60°C
Mains Supply	230 Volts +6% - 10%45Hz to 65Hz approx. 30VA
Safety	IEC 1010 Protective Class 1
Dimensions	255mm x 90mm x 263mm (W D H) approx
Mass	5kg approximately

Technical specification
Measurement	4 Terminal Kelvin/Thomson, eliminating lead resistance errors
Display	4.5 digit 15mm 7 segment LED with polarity and overload indication. 2 digit 16 segment LED for unit display
Ranges	9 ranges manual selection with up/down keys, automatic selection with autorange function
Auto Zero	Permits the automatic zero of amplifiers and external circuits
Temperature Compensation	Measurement compensated for the following referenced to 20°C:Copper Cu = 3.93%/KBrass Ms63 = 1.50%/KBrass Ms80 = 1.60%/KAmbient sensed with Pt 100 sensor
Relay Output	For the pre-selected upper and lower limit values “Too small”,“Correct”, “Too large” Contact load = 30W max 48V 1 Amp
Dry Circuit Measurement	In accordance with DIN 41640 part 4 and IEC – 132-1 Open circuit voltage limited to 18mV
Interface	RS232 25 pin D-Bush talk listen function
Terminals	4mm safety sockets
Working Temperature	0°C to 50°C rel. humidity 90% max. non-condensing
Storage Temperature	-20°C to +60°C
Mains Supply	230 Volts +6% - 10%45Hz to 65Hz approx. 30VA
Safety	IEC 1010 Protective Class 1
Dimensions	255mm x 90mm x 263mm (W D H) approx
Mass	5kg approximately

I'd like to talk to a sales advisor

Our team of sales advisors are on hand to help you with any queries you have about our products.

Make an enquiry

Request a quote