We're donating to the NHS

To show our appreciation for the NHS we will make a donation to the NHS charity for every PrimeTest or Apollo PAT tester bought and registered between the 1st June to 31st July 2020.

Product
Overview Specifications
& Manuals FAQs and
Articles Register
Your Product Service, Repair
and Calibration Software
and Firmware

STM/L

SPECIFICATIONS & MANUALS

If you're looking for the STM/L datasheet featuring full technical specifications or the instruction manual, you can find them here.

Manuals

Datasheets

Specifications

Flash/Hipot Test (Class I)
Test Voltage Class I	1.5kV AC
Display Range	0.1 – 10.00mA
Resolution	0.01mA
Accuracy	+/- 5% +/- 2 digits
Pass Levels	Selectable up to 10mA

Flash/Hipot Test (Class II)
Test Voltage Class II	3.0kV AC
Range	0.1 – 10.00mA
Resolution	0.01mA
Accuracy	+/- 5% +/- 2 digits
Pass Levels	Selectable up to 10mA

Earth/Ground Bond Test
Test Voltage	6VAC (open circuit)
Test Currents	25A, 10A, 4A, 100mA AC into short circuit
Range	0.04 - 20Ω
Resolution	1mΩ
Accuracy	+/- 5% +/- 2 digits
Pass Levels	User selectable

DC Insulation Test
Test Voltages	250V, 500VDC
Range	100k - 50M
Accuracy	+/- 5% +/- 2 digits

Earth Leakage (Load Leakage)
Voltage	Mains Supply
Range	0.1 – 20mA
Resolution	0.01 mA
Accuracy	+/- 10% +/- 2 digits (1.00 – 20mA)
Pass Levels	Selectable up to 10 mA

Substitute Leakage (Short to case test)
Voltage	40VAC nominal at 230V/110V supply
Range	0.1 – 20mA
Resolution	0.01 mA
Accuracy	+/- 10% +/- 2 digits (1.00 – 20 mA)
Pass Levels	Selectable up to 15 mA

Power/Run/Load Test
Measured Load	0 – 4.2kVA
Resolution	0.01 kVA
Accuracy	+/- 10% of reading, +/- 2 digits

Polarity
Test performed	Live & Neutral continuity & polarity

External Connections
Serial Port
Parallel Port
Guard Switch
Beacon

General Specifications
Dimensions (w x h x d)	450 x 410 x 155mm / 17.7 x 16.1 x 6.1”
Weight	9kg / 19.8lb
Operating Voltage Range	103V – 126V, 207V – 253V, 45Hz – 65Hz
Operating Temperature	0 – 40°C
EN 50191	Compliant when used with appropriate accessories

Flash/Hipot Test (Class I)
Test Voltage Class I	1.5kV AC
Display Range	0.1 – 10.00mA
Resolution	0.01mA
Accuracy	+/- 5% +/- 2 digits
Pass Levels	Selectable up to 10mA

Flash/Hipot Test (Class II)
Test Voltage Class II	3.0kV AC
Range	0.1 – 10.00mA
Resolution	0.01mA
Accuracy	+/- 5% +/- 2 digits
Pass Levels	Selectable up to 10mA

Earth/Ground Bond Test
Test Voltage	6VAC (open circuit)
Test Currents	25A, 10A, 4A, 100mA AC into short circuit
Range	0.04 - 20Ω
Resolution	1mΩ
Accuracy	+/- 5% +/- 2 digits
Pass Levels	User selectable

DC Insulation Test
Test Voltages	250V, 500VDC
Range	100k - 50M
Accuracy	+/- 5% +/- 2 digits

Earth Leakage (Load Leakage)
Voltage	Mains Supply
Range	0.1 – 20mA
Resolution	0.01 mA
Accuracy	+/- 10% +/- 2 digits (1.00 – 20mA)
Pass Levels	Selectable up to 10 mA

Substitute Leakage (Short to case test)
Voltage	40VAC nominal at 230V/110V supply
Range	0.1 – 20mA
Resolution	0.01 mA
Accuracy	+/- 10% +/- 2 digits (1.00 – 20 mA)
Pass Levels	Selectable up to 15 mA

Power/Run/Load Test
Measured Load	0 – 4.2kVA
Resolution	0.01 kVA
Accuracy	+/- 10% of reading, +/- 2 digits

External Connections
Serial Port
Parallel Port
Guard Switch
Beacon

General Specifications
Dimensions (w x h x d)	450 x 410 x 155mm / 17.7 x 16.1 x 6.1”
Weight	9kg / 19.8lb
Operating Voltage Range	103V – 126V, 207V – 253V, 45Hz – 65Hz
Operating Temperature	0 – 40°C
EN 50191	Compliant when used with appropriate accessories

I'd like to talk to a sales advisor

Our team of sales advisors are on hand to help you with any queries you have about our products.

Request a call back

Request a quote